CHD-502N |
This sample changer can serve
density meter.
The whole sampling lines from its beginning to the measuring cell is
rinse cleaned and purge dried automatically for continuous sample
measurements.
• Adoption of a peristaltic pump allows an operator to measure the
density on higher viscous sample of 30,000mPa･s.
• 30 samples are loaded and continuously measured by pressurized
sampling.
• Draining method are pressurized draining and sample-returning
system.
• Sequential events can be interrupted by priority measurement. |
CHD-502N (Room temperature only)
| Number of sample
vials |
30 |
| Vial size |
20mL vial |
| Sampling method |
Pressurized by built-in pump |
| Draining method |
Pressurized draining and
sample-returning system |
| Temperature setting |
N/A |
| Ambient condition |
5 - 35°C, less than 85%RH |
|
| |
CHD-502H (Room temperature to 80°C)
| Number of sample
vials |
30 |
| Vial size |
20mL vial |
| Sampling method |
Pressurized by built-in pump |
| Draining method |
Sample-returning system |
| Temperature setting |
Room temperature to 80°C |
| Ambient condition |
5 - 35°C, less than 85%RH |
|
| |
CHD-502C (4°C to room temperature)
| Number of sample vials |
30 |
| Vial size |
20mL vial |
| Sampling method |
Pressurized by built-in pump |
| Draining method |
Pressurized draining and
sample-returning system |
| Temperature setting |
4°C to room temperature by
circulating water bath |
| Ambient condition |
5 - 35°C, less than 85%RH |
|
