- Foaming Characteristics of Lubricating Oils ASTM D892, D6082;
IP 146; DIN 51566; FTM 791-3211, 791-3213
- Water Separability of Petroleum Oils and Synthetic Fluids
ASTM D1401, D6074, D6158; ISO 6614; DIN 51599; FTM 791-3201
- Demulsibility Characteristics of Lubricating Oils ASTM D2711;
DIN 51353
- Gas Bubble Separation Time of Petroleum Oils ASTM D3427; IP
313; DIN 51381
- Oxidation Stability of Steam Turbine Oils by Rotating Bomb
ASTM D2112, D2272, D4742; IP 229
- Oxidation Stability of Inhibited Mineral Insulating Oil by
Rotating Bomb ASTM D2112, D2272; IP 229
- Oxidation Stability of Gasoline Automotive Engine Oils by
Thin-Film Oxidation Uptake (TFOUT) ASTM D4742
- Oxidation Characteristics of Inhibited Mineral Oils ASTM
D943, D2274, D2240, D2893, D4310, D4636, D5968, D6158; DIN 51586, 51587,
51394; FTM 791-5307, 791-5308
- Determination of the Sludging Tendencies of Inhibited Mineral
Oils ASTM D4310
- Oxidation Stability of Distillate Fuel Oil (Accelerated
Method) ASTM D2274
- Oxidation Characteristics of Extreme Pressure Lubricating
Oils ASTM D2893
- Oxidation Stability of Mineral Insulating Oils ASTM D2440
- Corrosiveness and Oxidation Stability of Hydraulic Oils,
Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils ASTM
D4636, D5968; FTM 791-5307, 791-5308; IHC BT-10; DIN 51394
- Oxidation Stability of Inhibited Mineral Turbine Oils IP 48,
280, 306, 307, 331, 335
- Oxidation Stability of Straight Mineral Oil IP 306
- Oxidation Stability of Mineral Insulating Oil IP 307
- Stability - Corrosion Test for Non-Aqueous Fire Resistant
Fluids IP 331
- Oxidation Stability of Inhibited Mineral Insulating Oils IP
335
- Oxidation Test For Lubricating Oil IP 48
- Thermal Oxidation Stability of Automotive, Gear Lubricants
ASTM D5704; STP 512A L-60 Performance Test (formerly CRC L-60 Test); FTM 791
B Method 2504 95
- Rust Preventing Characteristics of Inhibited Mineral Oil in
the Presence of Water (Standard and Horizontal Disc Methods) ASTM D665,
D3603, D6158; NACE TM-01-72; IP 135; ISO 7120; DIN 51355, DIN 51585; FTM
791-4011, 791-5315
- Stability of Lubricating Oils (Work Factor) FTM 791-3451
- Corrosion of Lead by Lubricating Oils
FTM 791-5321.1
- Copper Corrosion From Petroleum Products ASTM D130, D6074,
D6158; IP 154
- Bearing Compatibility of Turbine Oils FTM 791-3452
- Pour Point of Petroleum Oils ASTM D97; IP 15; ISO 3016; DIN
51597; FTM 791-201
- Cloud Point of Petroleum Oils ASTM D2500; IP 219; ISO 3015;
DIN 51597
- Dielectric Breakdown Voltage of Insulating Oils ASTM D877,
D1816; IP 295; FTM 791-5702; NF C 27-221; IEC 156; VDE 0370 Coking Tendency of Oil FTM 791-3462
- Evaporation Loss of Lubricating Oils (Noack Test) ASTM D5800;
DIN 51851; CEC L40/T87
|
