鴻盛科儀有限公司(鸿盛科仪有限公司)
  GREEN TREE SCIENTIFIC & INSTRUMENT CO.

Home

Product

KEM Product

ISL Product

CANNON Product

Contact us

JAI Product
Outgas Collector for Thermal Desorption
for Electorical parts (4 samples)
Outgas Collector equipped with four sample vessels for sampling four components independently. The oven temperature can be changed from room temp. to 200C.

HM-04Ⅱ

Feature
•Consists of 4 sample vessels and 4 purge gas lines are independently controlled.
•Outgas from the parts are trapped on the Tenax in each PAT.
•PATs are removed, then installed in the P&T sampler and analyzed by GC/GC-MS.


for Electorical parts (10 samples)
Outgas Collector equipped with ten sample vessels for sampling various ten components. The oven temperature can be changed from room temp. to 200C.

HM-10

Feature
•Consists of 2 ovens capable of placing four samples and two ovens capable of one sample. Each oven can be independently heated.
•Purge gas flow rate supplied to 10 samples are adjustable as needed.
•Heating temperatures for each oven are adjustable from room temperature to 200C (up to 260C for baking).
•Heating time for each oven is adjustable with a timer as needed.
•Sample vessels are inactivated.
•Built-in water-cooling valve system simplifies oven temperature adjustment.


for Electrical parts (24 samples)
Outgas Collector equipped with twenty four sample vessels for sampling various twenty four components. The oven temperature can be changed from room temp. to 200C.

HM-24

Feature
•Consists of 4 ovens capable of placing six  samples. Each oven can be independently heated.
•Heating temperatures for each oven are adjustable from room temperature to 200C (up to 260C for baking).
•Heating time for each oven is adjustable with a timer as needed.
•Sample vessels are inactivated.
•Built-in water-cooling valve system simplifies oven temperature adjustment.


for Silicon Wafer
6”and 8”(SW-8400) or 12”(SW-12400) wafer can be placed in the quartz oven.

SW-8400/12400

Feature
•Quartz oven can be heated up to 500C.
•Generated gas from only one side of the wafer can be trapped into PAT.
•The wafer can be inserted or removed with ease by the built-in hydraulic pump.
•The chiller unit, facilitates quick cool down, is installed as standard accessory.


for Flat Panel
Developed for volatile components collection from only one side of the flat panel, such as LCD and PDP.

FP-9000

Feature
•Quartz oven can be heated up to 500C.
•Generated gas from only one side of the wafer can be trapped into PAT.
•The flat panel can be inserted or removed with ease by the built-in hydraulic pump.
•The chiller unit, facilitates quick cool down, is installed as standard accessory.


Outgas Collector with Baking Function
Double Function with Chamber for Outgas Collection and Baking of PAT.

  BO-HM-01

Feature
•Sample vessel of 250 ml capacity is equipped.
•Total 4 ea PAT (primary adsorption tube) can be baked.
•Both sample vessel and baking block can be inserted or removed with ease.
•A water-cooling function is available as an option.

For DVD
Outgas Collector equipped with four sample vessels for DVD media.

 TDV-04

Feature
•Consists of 4 ovens can be independently heated. Each oven accommodate one DVD, or several DVD media with spacer inserted.
•Purge gas flow rate supplied to 4 ovens are adjustable as needed.
•Heating temperatures for each oven are adjustable from room temperature to 200C.
•Heating time for each oven is adjustable with a timer as needed.
•Sample vessels are inactivated.


For 2.5" and 3.5" Hard Disk
Outgas Collector for 2.5” and 3.5” Hard Disk.

 HD-2.5/3.5

Feature
•Two types of outgas collectors are available depending upon the size of the hard disk.
•Inside wall of optional G-series is gold plated to make the surface inert.
•A tap water cooling controller is optional to automate cool down cycle after analysis.


For HDD
Outgas Collector for the components of the hard dist drive.

 HDD-500

Feature
•Outgas from the base and/or the cover for hard disk drive can be analyzed.
•Generally, double trapping method (use PAT) is recommended, since the volume of the oven is large.


For Operating HDD
Outgas Collector for operating hard dist drive.

 O-HDD

Feature
•VOC from a 3.5” HDD can be collected into the primary adsorption tube (PAT) while the drive is powered by an external source.
•After collection of VOC with the PAT, the tube is brought back to the P&T-GC laboratory. The VOC is then analyzed easily.
•The external temperature for a 3.5” HD can be adjusted from room temperature to 80C.
•Outgases from the working hard disk drive can be collected completely, due to the high adsorptive properties of the Tenax GR.


Air Sampler
AL-430 is designed to collect environmental gas with enhanced performance.

 AL-430

Feature
•Organic contaminations in the clean room can be conveniently collected in the primary adsorption tube with high speed.
•Only pre-measured volume of air is passed through the PAT.
•PAT is easily set onto the pole.
•Can be operated by internal battery.


For structural components
Outgas Collector for evolved gas from structural components.

 OCM-6T

Feature
•Easy to be carried into a clean room, then collect outgas from structural components.
•Due to a lining method using disposable aluminum foil in a sampling cup, there is no cross contamination from the remaining previous sample.
•The attached vacuum pump can realize easy ceiling of the aluminum foil.


Liquid Sampler

 AQ-200T

Feature
•Volatile compounds in hydrophilic samples can be trapped into the PAT.
•Alcohols can be efficiently trapped by slightly heating the PAT.
•VOC collection is highly efficient due to the nature and quantity (2.5 g) of adsorbent packed into the PAT.
 


Combustion Gas Sampler
Designed with a concept in which combustion of the polymer is inducted by pyrolysis at the first stage, then the pyrolyzates are burned at the second stage.

 CG-77

Feature
•Combustion gas analysis from polymers can be easily performed.
•Higher molecular weight of the combustion components can be detected.
•Combustion components are completely removed in the combustion cell.
•Polymer can be pryolyzed in the atmospheric environment.


Homepage : http://www.greentree.com.tw E-Mail : grentree@ms17.hinet.net
Copyright (C)  鴻盛科儀有限公司